TARA ♥ DIY PROJECTS
The pyjamas trend with monotone prints and silky garment is very hot for the moment. A lot of internationals designers like Stella McCartney, Jonathan Saunders, Louis Vuitton and D&G have used the pyjamas trend in their collection for Spring/Summer 2012.
I´m a big fan of this trend because I love wearing silky trousers. The material is so soft!! Geneva has sewed one pair on her blog A Pair and a Spare so if you can’t find a pair, just sew one! Hunt down some printed long scarfs with print at Second-Hand stores, or make your mother/grandmother give you theirs and start sewing! With this tutorial, you can also sew summery silky shorts!
ALL YOU NEED IS:
– 3m of printed fabric
– Some rope or ribbon to use as the waistband
– Black thread
– A seam ripper
– A pen or chopstick
– A sewing machine
1. Grab yourself a pair of wide leg trousers (pajama or fisherman trousers are fine). Fold your fabric in half and then lay the trousers with the long edge along the fold. Cut around the trousers, adding a good couple of cms/inches along the outside for the seams. Now repeat this step so you have two pieces of fabric.
2. Lay the two pieces of fabric again each other with the right side (outside) of the fabric facing in. Pin along the rounded edge. Try to match the patten up here as much as possible between the two pieces of fabric – this is where it will meet in the crotch.
3. Sew the two rounded seams with a zig zag stitch.
4. Flip the seams around so that they lay flat against each other to create the crotch.
6. Double the ankle hem over twice and sew down. For the waistband, double it over twice, making sure to leave 2.5cm (1in) of a gap for the waistband casing.
7. Using the seam ripper, at the front of the trousers open a few of the stitches of the waistband along the seam to create a hole. Tape the ribbon to the chopstick and then push it through the waistband casing, bringing it out the other side and tying the ends in a bow.